Ask Latest Price
Active Member
9 Years
Please input your companyname!
Add to Cart
- The T-typed square steel tube for lathe and gantry, the alloy aluminum working table.
- Use China 5.5KW water cooling motor spindle and 5.5KW inverters,
Optional items: 6.0KW HSD air cooling motor
air cylinder brakes for Z axis to hold heavy duty 5.5KW spindle
- XYZ axis adopt Taiwan HIWIN linear square guide rail, diameter 20mm, more precision.
- XY axis are good quality rack transmission, the Z axis is ball screw transmit(2505).
- XYZ axis adopt 750W Yaskawa Servo system.
Optional items: step system and hybrid servo system
- Z axis 450mm height. higher Z axis height optional. Rotary axis for round material, diameter 200mm, working length 1200mm
- Emergency stop button, it is very convenient to control machine.
- Three axis are use stable limit switch to off and on.
- The AC 60V 500W transformer for inverter.
- Stainless steel water slot for tools protection.
- Multiple choice of control software:Original NcStudio Control system, suitable for desktop computer with PCI slot, win7/xp/2000,Support XYZA axis working together.
Optional items: Mach3 or DSP control system
- Different design software include type3, Artcam, Mastercam, Ucancam, JDpaint and so on.
- Three axis are dust proof
- The voltage is AC 380V 50HZ.
- Computer control box to put into desktop computer
| Items | Configuration |
| Certificate | CE |
| XY-axis working area | 1300*2500mm |
| Material | Welded steel pipe machine holder and machine bed, cast iron vertical shafts and transom |
| Moving way | Gantry moving |
| Working table | Aircraft aluminum with T slot |
| Guide way | XYZ-axis linear square guide rail |
| Driving mode | XY rack gear, Z ballscrew |
| Z-axis working area | 450mm (to put rotary axis diameter 200mm, working length 1200mm) |
| Max traveling speed | 24000mm/min |
| Engraving speed | 18000mm/min |
| Mechanical precision | 0.05mm |
| Driving method | Yaskawa servo system 750W |
| Water cooling system | Stainless steel water slot |
| Spindle | 5.5KW water cooling (air cylinder optional) |
| Spindle speed | 0-24000rpm |
| Collet type | ER25 |
| Tools diameter | 3.175mm, 4mm, 6mm,8mm,10mm,12.7mm |
| Control system | Original NcStudio control system (optional: DSP or Mach3) |
| Design software when delivery | Artcam |
| Compatible design software | Artcam, Type3, Ucancam, JDPaint, MasterCAM |
| Command | G code ,U00, mmg nc,etc |
| Running ambient temperature | 0-45℃ |
| Relative humidity | 30%-75% |
| Voltage | AC 380V,50/60Hz, three single phase |
| Auto tool calibration | For Z-axis |
| Tools | 12 pcs for stone |